12-28-2009, 09:09 AM

Hi Guys, my (bless him) little brother restarted my MacBook whilst installing a software update, all i get now when I turn on is a kernel panic with the following message:

panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x000000000, type 14=page fault, registers:

CR0: 0X8001003B, CR2: 0X000000000 ETC ETC

ERROR CODE : 0X00000010

Debugger called : <panic>
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x1b2e3d28 : 0x12b4f3 (0x45b13c 0x1b2e3d5c 0x1335e4 0x0)
0x1b2e3d78 : 0x1a9c68 (0x464700 0x0 0xe 0x463eb0)
0x1b2e3e58 : 0x1a038d (0x1b2e3e70 0x206 0x1b2e3f38 0x0)
0x1b2e3e68 : 0x0 (0xe 0x48 0x10 0x9eb0010)
0x1b2e3f38 : 0x1b2b0f13 (0x263ac00 0x0 0x2699a78 0x2699e40)
0x1b2e3f58 : 0x1b2b54ab (0x2699a78 0x9eb2e9a 0x0 0x0)
0x1b2e3fc8 : 0x1a017c (0x0 0x0 0x1a30b5 0x2699e40)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with de...RESTART WINDOW IS IN WAY HERE)
com.apple.driver.appleIntelCPUPowerManagement...RE START WINDOW


BSD process name corresponding to current thread: U...RESTART WINDOW

Mac Ox version:
Not yet set

Kernel Version
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PS... RESTART WINDOW
System model name Macbook 3,1 (Mac f22788C8)

Copied that out, took ages, i read its the bit ablout the backtrace thats important, the other snag is that my CD drive is broken so can't use install disk.

any ideas would be massively appreciated, I'm a DJ and have all my music on it for NYE!

Cheers

Alex

12-28-2009, 08:49 PM

I have the same issue going on right now with my system. I simply did a software update, and the computer never rebooted.

I called Applecare, and they say this is a common issue when Operating system files not properly installed.

Mac reccomends to attempt to start your computer in safe mode, or to boot with your boot disk and run disk utility to repair the disk.

Neither of these worked for me, but please let me know if you find a solution