New To Mac-Forums?

Welcome to our community! Join the discussion today by registering your FREE account. If you have any problems with the registration process, please contact us!

Get your questions answered by community gurus Advice and insight from world-class Apple enthusiasts Exclusive access to members-only contests, giveaways and deals

Join today!

 
Start a Discussion
 

Mac-Forums Brief

Subscribe to Mac-Forums Brief to receive special offers from Mac-Forums partners and sponsors

Join the conversation RSS
Internet, Networking, and Wireless Discussion of networking, internet, and wireless including Apple's Airport products.

Wireless Access Point questions


Post Reply New Thread Subscribe

 
Thread Tools
PhillT

 
Member Since: Feb 01, 2010
Posts: 19
PhillT is on a distinguished road

PhillT is offline
I am trying to connect a non wireless computer to an existing wireless network using a WET54G wireless access point. (Bridge?)

The existing network is a WRT54GL wireless router, handling PPPoE and DHCP, through a DSL502T in Bridge mode and no DHCP service, to ADSL connection.

Should I have the WET54G set to DHCP or Static IP ?

Should the computers Ethernet port be set to Manual or Auto DHCP ?

When I try auto DHCP, it gets an IP address way out of range of anything on the network for some reason.

Cheers.
QUOTE Thanks
SweetCosmicPope

 
SweetCosmicPope's Avatar
 
Member Since: Dec 16, 2009
Location: Baytown, Tx
Posts: 373
SweetCosmicPope has a spectacular aura about
Mac Specs: Late 2009 Macbook Pro 2.26, 160gb HD, 2gb RAM, OSX 10.6; Emac 1.42ghz 80gb HD 2gb RAM OSX 10.5

SweetCosmicPope is offline
It depends on what your provider uses. Most likely it should be auto DHCP, as most companies such as comcast and verizon will assign you an IP when you log into the network.

"That's Peter Graves scat! I'd know it anywhere!"
QUOTE Thanks
PhillT

 
Member Since: Feb 01, 2010
Posts: 19
PhillT is on a distinguished road

PhillT is offline
Quote:
Originally Posted by SweetCosmicPope View Post
It depends on what your provider uses. Most likely it should be auto DHCP, as most companies such as comcast and verizon will assign you an IP when you log into the network.
Wow. now I am really confused. My wireless router is handling my ISP details (PPPoE) and also DHCP for the LAN, the modem is in bridged mode, so why would an ethernet to wireless LAN bridge (WET54G) be in any way related to the ISP?
I might only want access to the LAN from the bridge for instance, so ISP (WAN) is not even in the mix under those circumstances.

Please, enlighten me. As soon as I think I have learned a bit, it seems I have not :-(
QUOTE Thanks
SweetCosmicPope

 
SweetCosmicPope's Avatar
 
Member Since: Dec 16, 2009
Location: Baytown, Tx
Posts: 373
SweetCosmicPope has a spectacular aura about
Mac Specs: Late 2009 Macbook Pro 2.26, 160gb HD, 2gb RAM, OSX 10.6; Emac 1.42ghz 80gb HD 2gb RAM OSX 10.5

SweetCosmicPope is offline
Oh wait. I think I misunderstood your question. Let me ponder this.

"That's Peter Graves scat! I'd know it anywhere!"
QUOTE Thanks
SweetCosmicPope

 
SweetCosmicPope's Avatar
 
Member Since: Dec 16, 2009
Location: Baytown, Tx
Posts: 373
SweetCosmicPope has a spectacular aura about
Mac Specs: Late 2009 Macbook Pro 2.26, 160gb HD, 2gb RAM, OSX 10.6; Emac 1.42ghz 80gb HD 2gb RAM OSX 10.5

SweetCosmicPope is offline
Hmm. Honestly, I'm not sure. On one hand I would think it would be DHCP, because, in essence, it is routing the actual network connection, but I'm also thinking it might be static, by using the IP of the modem being bridged.

I may have to take a pass on this one, because it's getting over my head (at least without it sitting in front of me for me to tinker with).

"That's Peter Graves scat! I'd know it anywhere!"
QUOTE Thanks
PhillT

 
Member Since: Feb 01, 2010
Posts: 19
PhillT is on a distinguished road

PhillT is offline
Further development........I have managed to get the bridge to connect to the wireless network. It seems that it needs to have the ethernet connected computer to have a static ip for configuring the bridge, but once it has a wireless connection, it can then be changed to auto DHCP, and it gets an ip from the router. The bridge is in DHCP mode too.

There seems to be another issue though. The router and the Bridge are both supposed to support WPA TKIP, but I can only get a connection if I disable WPA.

I will have to settle for WEP until I find out what the issue is.

Cheers.
QUOTE Thanks
Slydude

 
Slydude's Avatar
 
Member Since: Nov 15, 2009
Location: North Louisiana, USA
Posts: 6,546
Slydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant futureSlydude has a brilliant future
Mac Specs: 2.8 GHz MacBook Pro 10.8,3 8 GB mem, 2.66 GHz Mac Pro - Dead, iPhone 4

Slydude is offline
This is a bit of an unusual setup. Normally I might expect the modem to handle things with the ISP and getting the initial IP address. The router would then handle things between your model and other devices on the network. Anything, such as a WAP, used to extend the network would likely be in bridge mode so that it would not assign an IP that conflict with one already assigned by the router.

Who is your provider? Perhaps the great Google can tell me a bit more about their setup.

Sylvester Roque Former Contributing Editor About This Particular Macintosh

"Got Time to breathe. You got time for music." Denver Pyle as Briscoe Darling
QUOTE Thanks
SweetCosmicPope

 
SweetCosmicPope's Avatar
 
Member Since: Dec 16, 2009
Location: Baytown, Tx
Posts: 373
SweetCosmicPope has a spectacular aura about
Mac Specs: Late 2009 Macbook Pro 2.26, 160gb HD, 2gb RAM, OSX 10.6; Emac 1.42ghz 80gb HD 2gb RAM OSX 10.5

SweetCosmicPope is offline
He's on ADSL, so I assumed it was probably verizon. If that's the case, then his modem is likely built-in to a non-wired router, hence the bridge to a wireless access point. Otherwise, I would just suggest taking down the whole thing and setting it up in a classic fashion.

"That's Peter Graves scat! I'd know it anywhere!"
QUOTE Thanks
PhillT

 
Member Since: Feb 01, 2010
Posts: 19
PhillT is on a distinguished road

PhillT is offline
I have tried various configurations to get the Linksys Router and the D-Link Modem to play ball with each other, and the only configuration that works reliably is as follows:-

Mac (Airport) -> Linksys Wireless Router -> D-Link Modem (via ethernet) -> adsl connection.

Router is in Gateway Mode handling PPPoE and DHCP server for the LAN and Modem is in Bridged Mode to the WAN because the crappy modem will not handle DHCP reliably when used with the Linksys in Router mode (no DHCP)

I had no end of problems with LAN network connections dropping of and taking forever to connect etc. etc. (many people have had similar experiences with these two together). The current configuration works very fast and very reliably. It is a dream to use.

The only problem I am having now, (sorted out the other issues) is connecting a third computer (non airport iMac) to the wireless network with the WET54G bridge, with WPA -TKIP security.

The router supports WPA-TKIP, and the WET54G is a Version 2 with the latest firmware, which is supposed to support WPA-TKIP, and shows it in the Security Options, but it will not work. If I set both to WEP, it works great.

So, other than wireless security, this setup is now working great.

The setup to the non airport iMac is:-

iMac with ethernet cable to WET54G Wireless Bridge -> Linksys Wireless Router WRT54GL -> ethernet cable to D-Link Modem DSL-502T -> adsl connection.
QUOTE Thanks

Post Reply New Thread Subscribe


« yahoonews is giving me the wrong local news | Airport Extreme Error (-4) when configuring via Windows »
Thread Tools

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off
Forum Jump

Similar Threads
Thread
Thread Starter
Forum
Replies
Last Post
Wireless Bridge and Access Points joe.morgan Internet, Networking, and Wireless 2 09-21-2009 06:31 PM
Wireless access using 10.4&10.5 MacChris OS X - Operating System 1 06-26-2008 10:36 PM
Questions about my Linksys Wireless router rhoodtay Internet, Networking, and Wireless 1 05-20-2008 04:27 AM
Help..How to connect wirelessly with an Access Point? mec Apple Notebooks 5 07-28-2004 05:12 PM

All times are GMT -4. The time now is 04:23 PM.

Powered by vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
X

Welcome to Mac-Forums.com

Create your username to jump into the discussion!

New members like you have made this community the ultimate source for your Mac since 2003!


(4 digit year)

Already a member?