06-16-2008, 07:08 AM #1
Adding Leopard Server Share as PC Network place
- Member Since
- Jun 16, 2008
This maybe a simple question but I've been trying to add a share point from a Leopard server onto a PC and am getting nowhere!
If the server address is \\10.130.57.250\
the share is within \Macintosh HD\T & O Share\ what should I be putting in to the add network place wizard? I've tried everything but to no avail.
Any help would be grand!
06-16-2008, 10:16 AM #2
- Member Since
- Apr 29, 2008
- Brisbane, Australia
- MacBook Pro 15" 2.5 GHz 2 GB RAM 250 GB HDD NViDA GeForce 8600 GMT
Well Mac usually uses afp protocol by default for sharing over the network.
So you probably need to enable sharing on Samba (smb-in short)...
Then you shoould be able to connect your pc to your leopard share..
And in PC make sure that it is part of "WORKGROUP"
If not restart your pc once you have it configured for the workgroup..
Then you can either go through add network place wizard & simply put the IP address in the PC or you can simply view the workgroup computers & browse to your Leopard SHare server point withing windows explorer..
Hope that helps..
Cheers..iPod 5.5 Gen Video 30 GB | iPod Classic 80 GB |Airport Express |
MacBook Pro Penryn 2.5 GHz | 2 GB RAM | NVida GeFroce 8600 GMT|
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SteelblueTJ in forum Apple DesktopsReplies: 1Last Post: 02-28-2012, 04:54 PM
By LewisHamilton in forum Internet, Networking, and WirelessReplies: 1Last Post: 08-18-2010, 06:39 AM
By Frites in forum Internet, Networking, and WirelessReplies: 0Last Post: 08-25-2009, 06:07 PM
By clivet in forum Web Design and HostingReplies: 2Last Post: 05-15-2008, 02:30 PM
By jprez1980 in forum Switcher HangoutReplies: 5Last Post: 01-30-2007, 03:57 AM