Macbook Pro Issue

elohelomg · elohelomg #1 (**permalink**)

04-30-2011, 05:48 PM

Recently, i bought a bottom case for my macbook pro 2ghz processer one. I put in the mother board, placed everything as is, but, when i plugged in the power cord, the light was very dim, and then began to blink yellow. I have not scratched the mother board or anything, and, as far as i can tell, everything is in place...

i think it could possibly be a missing screw or something that hasn't set right.

PLEASE HELP!

chscag · chscag #2 (**permalink**)

04-30-2011, 05:53 PM

The only advice I can give you is to disassemble it again and make sure everything is correct. No loose connectors, etc. Go to the ifixit web site and glance over their step by step instructions. iFixit: The free repair manual

elohelomg · elohelomg #3 (**permalink**)

05-01-2011, 06:55 PM

I have put in a working mobo on it as well, and the light still seems to be blinking yellow.

chscag #2 (permalink)
Member Since: Jan 23, 2008 Location: Fort Worth, Texas Posts: 31,955 Mac Specs: 21.5" iMac 2.5 GHz i5, iPad 3rd Gen., 3 iPods	04-30-2011, 05:53 PM The only advice I can give you is to disassemble it again and make sure everything is correct. No loose connectors, etc. Go to the ifixit web site and glance over their step by step instructions. iFixit: The free repair manual Community Guidelines
	QUOTE Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Odd Macbook pro Issue	RyanMoroz	Apple Notebooks	1	04-21-2011 01:35 PM
2011 Macbook Pro Known Network Issue	ariliquin	Internet, Networking, and Wireless	0	03-29-2011 11:47 PM
MacBook Pro HDD Format issue... help!	christianhough	Other Hardware and Peripherals	9	10-20-2010 02:27 PM
Macbook Pro Wifi issue	alex_collier	Internet, Networking, and Wireless	3	04-16-2010 09:31 PM
10.5.2 is out!	pastorjay	OS X - Operating System	105	02-14-2008 11:06 AM

Macbook Pro Issue

Internet Services

Web Development

Digital Marketing

Consumer Tech

elohelomg #1 (permalink)
Member Since: Apr 30, 2011 Posts: 2	04-30-2011, 05:48 PM Recently, i bought a bottom case for my macbook pro 2ghz processer one. I put in the mother board, placed everything as is, but, when i plugged in the power cord, the light was very dim, and then began to blink yellow. I have not scratched the mother board or anything, and, as far as i can tell, everything is in place... i think it could possibly be a missing screw or something that hasn't set right. PLEASE HELP!
	QUOTE Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)