Results 1 to 5 of 5

Thread: have problem

  1. #1
    have problem

    Member Since
    May 10, 2007
    Posts
    3
    have problem
    hello. i'm from russia so sorry for my english.
    i have a problem.

    panic(cpu 1 caller 0x00013AF0): bad dp memory object
    Latest stack backtrace for cpu 1:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x00013AF0 0x00076298
    0x00076384 0x0028B04C 0x000E603C
    0x000E6358 0x000E87B4 0x000E5D60 0x000EC2D0 0x000E6F30
    0x0026FED4 0x0027C9A8 0x002AB7F8
    0x000ABB30 0x031546C0
    Proceeding back via exception chain:
    Exception state (sv=0x54651C80)
    PC=0x900C7FC0; MSR=0x0000D030; DAR=0x901FCB76;
    DSISR=0x40000000; LR=0x0000292C; R1=0xBFFFFE80; XCP=0x00000030 (0xC00
    - System call)

    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007;
    root:xnu-792.17.14~1/RELEASE_PPCModel: PowerMac7,3, BootROM 5.1.8f7,
    2 processors, PowerPC G5 (2.2), 1.8 GHz, 2 GB
    Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
    Memory Module: DIMM0/J11, 512 MB, DDR SDRAM, PC3200U-25440
    Memory Module: DIMM1/J12, 512 MB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM2/J13, 512 MB, DDR SDRAM, PC3200U-25440
    Memory Module: DIMM3/J14, 512 MB, DDR SDRAM, PC3200U-25440
    Modem: MicroDash, Euro, V.92, 1.0F, APPLE VERSION 2.6.6
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST380013AS, 74.53 GB
    Parallel ATA Device: HL-DT-ST DVD-RW GWA-4082B
    USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/
    sec, 500 mA
    USB Device: Apple Optical USB Mouse, Primax Electronics, Up to 1.5 Mb/
    sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec,
    250 mA


    i instal new ram (all 4 rams new), and install os classic - for the specific programьs (Qurak express 4.1, Adobe Illustrator 8). os classic run in emulation for this prograьms. It can be connected with an arising problem?

  2. #2
    MacHeadCase
    Guest
    Welcome to Mac-Forums, RomanFX.

    In the crash log you posted right above, I believe it says one of the RAM modules you installed is bad.

    panic(cpu 1 caller 0x00013AF0): bad dp memory object
    I don't know how many of them you installed exactly but you will need to eliminate them one by one. Pull one out of the Power Mac, restart, see if it runs ok. If not pull another one out, put the first module you took out back in, restart and see if the system is stable, etc.

    Good luck.

  3. #3
    have problem

    Member Since
    May 10, 2007
    Posts
    3
    Thanks - has gone to try

  4. #4
    have problem

    Member Since
    May 10, 2007
    Posts
    3
    new problem )

    Date/Time: 2007-05-13 19:28:38.600 +0400
    OS Version: 10.4.9 (Build 8P135)
    Report Version: 4

    Command: Adobe Photoshop CS2
    Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
    Parent: WindowServer [63]

    Version: 9.0.2 (9.0.2x312 [20060822.902x312 02:00:00 cutoff]9.0.2x311) (9.0.2)

    PID: 223
    Thread: 0

    Exception: EXC_BAD_ACCESS (0x0001)
    Codes: KERN_INVALID_ADDRESS (0x0001) at 0x2ba34be4

  5. #5
    MacHeadCase
    Guest
    Ok. First, I don't know if you pulled out the bad RAM module(s) or not, you haven't updated us on what you did earlier in this thread.

    Second, by looking at this Apple webpage in the Developer's Connection website, CrashReporter which explains in detail the various reasons for a crash, it would seem to me that you either don't have enough RAM for Photoshop or it tried to access RAM that wasn't available.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. outlook 2011 problem problem problem
    By knfall97 in forum OS X - Apps and Games
    Replies: 0
    Last Post: 03-13-2011, 12:16 AM
  2. Replies: 4
    Last Post: 12-31-2010, 05:19 PM
  3. Replies: 0
    Last Post: 03-08-2010, 08:13 PM
  4. Replies: 7
    Last Post: 09-01-2008, 10:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •