Apple Desktops Discussion of Apple's desktop machines including Mac Pro, iMac, Power Mac, and mini

Putting Ram, and a Hard Drive in the G5


Post Reply New Thread Subscribe

 
Thread Tools
RobDreugan
Guest
 
Posts: n/a

For anyone that has a G5, I'm just wondering how difficult this is to physically do.

I've done this countless times on a PC, I just want to be sure that like, the Ram slots aren't hidden under both G5 chips or I have to completely disassemble the case to put a hard drive in and reach the controller.

Any info will be most appreciated.


thanks,

Rob
QUOTE Thanks
Trogdor
Guest
 
Posts: n/a

They had a clear side case on display at one store. The RAM slots are very easy to get to, to the left is wide open spaces, you have to upgrade in pairs, i forget the perfect erm for it, but they are matched pairs, dual channel i believe. You need DDR400 Dual Channel memeory. AS for the Hard drive, I saw 2 drive bays at the top right of the system, there is rom to at 1 HD more. I looked over the case didn't see much more room then that for upgrades, other then the 3 PCI slots.
QUOTE Thanks
Emrys

 
Emrys's Avatar
 
Member Since: Oct 27, 2002
Location: Vermont
Posts: 1,345
Emrys is on a distinguished road
Mac Specs: 17" iMac G4 800MHz 1GB RAM

Emrys is offline
From what I've seen, you take the 4 screws apple has included inside the case, screw them into the 4 points of the hard drive, slide it in, connect it to the power and SATA connection, and you're done. Simple as that. The RAM isn't much harder, although I didn't take a real close look at that yet. But like Trogdor said, you must install RAM in pairs.

Emrys
Community Administrator / Moderator
MAC-FORUMS.COM - The Ultimate Source For Your Mac!
QUOTE Thanks
RobDreugan
Guest
 
Posts: n/a

Quote:
Originally Posted by Emrys
From what I've seen, you take the 4 screws apple has included inside the case, screw them into the 4 points of the hard drive, slide it in, connect it to the power and SATA connection, and you're done. Simple as that. The RAM isn't much harder, although I didn't take a real close look at that yet. But like Trogdor said, you must install RAM in pairs.

Again, I know the procedure of how to install a hard drive, and that the ram needs be DDR400, in pairs, and non-parity.

I just wanted to be sure that the case isn't designed in a way where I have to start removing chunks of it, to get to where the ram is, or the secondary controller to attach a data cable.

In my dealings with other "name brand" computers like working on dell's, compaq's etc.... I've found many times you'll have to remove things from the system, unless you have child size hands in order to get to sections of the MB.
QUOTE Thanks
Graphite

 
Graphite's Avatar
 
Member Since: Feb 25, 2003
Location: Tropical Island, Jealous?
Posts: 5,279
Graphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud ofGraphite has much to be proud of
Mac Specs: MacPro 3.0Ghz 16GB RAM, 4x256 Vid, 30''cinema display

Graphite is offline
Nahh, apple is pretty good about making adding ram more easy. I rem the old 2nd or 3rd gen iMac (where it started) and all you had to do was lift a tiny piece of plastic up put a chip in and ur done... ah i love it.
QUOTE Thanks
hokiethang
Guest
 
Posts: n/a

Quote:
Originally Posted by Graphite
Nahh, apple is pretty good about making adding ram more easy. I rem the old 2nd or 3rd gen iMac (where it started) and all you had to do was lift a tiny piece of plastic up put a chip in and ur done... ah i love it.
yeah and the powerbook where all you do is flip the keyboard up to upgrade the ram. Apple cares about their users and realizes they will upgrade their machines theirselves instead of paying for someone to install it for them.
QUOTE Thanks
dziner
Guest
 
Posts: n/a

The RAM is installed directly behind the front fans. The fans simply slide out giving you access to the RAM. The hard drive slides right into place below the factory one. Again - quite simple. And the manual that comes with your G5 shows you in detail how this is done.
QUOTE Thanks

Post Reply New Thread Subscribe


« Sweet 233MHz G3 | switching to mac »
Thread Tools

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off
Forum Jump

Similar Threads
Thread
Thread Starter
Forum
Replies
Last Post
Trouble @ Stratup?? JTSkywalker OS X - Operating System 8 01-05-2005 03:34 PM
Is my RAM compatible? bloodmyst Apple Notebooks 4 10-03-2003 09:02 AM
power supply/hard drive question goodolebwinches Apple Desktops 1 09-01-2003 11:33 AM
iMac RAM nko Switcher Hangout 6 08-22-2003 02:54 PM
Upgrade RAM Emrys Apple Desktops 9 06-01-2003 02:03 AM

All times are GMT -4. The time now is 05:25 PM.

Powered by vBulletin
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
X

Welcome to Mac-Forums.com

Create your username to jump into the discussion!

New members like you have made this community the ultimate source for your Mac since 2003!


(4 digit year)

Already a member?