Thread: Beige G3 help
01-24-2005, 10:56 AM #1ajbertGuestBeige G3 help
I recently received a free beige g3 333, 128 ram, stock cd, zip, 4x yahama internal cdrw, 8 gb hard drive, with pci usb ports. It came with 8.5. It would not start up at first, kept on giving me error 11's. I used a boot disk and modified the extensions and it worked great. I wanted to update it to 9.1 and eventually to OS X. I installed OS 9.1, the installation went with no problems. I restarted the computer and I got the same error 11 messages. But I have been unable to fix it. Then I reinstalled the 8.5 and it worked perfectly. The only things I can think of is the hard drive and pram battery which is near or is dead. The hard drive is a 68 pin scsi hookedup through a pci atto express scsi card. IF any one knows what to do or has any ideas let me know.
01-24-2005, 11:09 AM #2
- Member Since
- Oct 30, 2004
- San Antonio, Texas
- PowerMac G4 Cube 450mhz 832mb
make sure the transfer rate is set to 10 mb a sec, if its not, or rto check, get attos expresspro tools app from their site.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By nathanpiercy in forum OS X - Apps and GamesReplies: 4Last Post: 05-10-2006, 10:39 AM
By audiomac in forum Apple DesktopsReplies: 1Last Post: 02-19-2006, 06:58 PM
By Supachicken in forum Apple DesktopsReplies: 2Last Post: 09-18-2004, 09:53 AM
By Padawan in forum Apple DesktopsReplies: 7Last Post: 09-06-2004, 04:36 PM
By St Anger in forum Apple DesktopsReplies: 2Last Post: 02-03-2004, 04:23 PM