04-18-2008, 11:10 PM
1)Reset your Time Capsule by pressing and holding the little button for 5 seconds behind the TC. The light will blink amber several times before it stays amber. (I am asking you reset so we can start fresh with the company config, if you think your TC is with company config skip this step)
2)Connect the Ethernet cable from your other Router into the WAN port in the Timecapsule.
3)Use an another Ethernet cable to connect one end to the Time capsule's LAN port and the other End to your MAC. You will now see the timecapsule in your finder as a shared device with company set name .
4)Open the Airport Utility from your Utlities folder, it will say 'Discovering Apple wireless devices and the screen like the one below will appear.
5) Click Continue and you will see the screen below. Enter the name and password to TC .
6)Click Continue and the next screen will be like the one below.
7)Select " I dont have a Wireless Network and i want to create one" and hit continue and the next screen will ask for the network name and the WPA key.
8)Select Bridge Mode and hit continue
9)Now your TC should automatically get a private ip and should look similar the the below image. Dont change the settings (Using DHCP)unless you want to set a static private Ip for your MAC. Hit continue
10)This screen will summarize all the settings. Hit update
12)You can see the TC lite blinking amber and turning into Green and you will see the screen below.
13) And the next screen will say that the whole freaking process is successful.
See the next post coz the images to post here are limited to 10.