[AlexUK]

ok so i experimented a little with the hardware and here what i have to the moment:

1. i thought that the usb kb could be the case for mac os to crash so i disconnected the cable from the KVM and plugged normal apple kb to the mac.

2. however when i tried switching back to mac, the machine crashed again.

from what i noticed for the last few days 'working' with this kvm switch was the screen resolution changing while i was switching. meaning the screen flickered for couple of times prior to showing 1280x1024 that was set up in the system. during flickering the resoution became 1024x768. i 've seen it pretty clearly, just it was for half of a second.

also when powering up both machines, they were starting with 1024x768 and not 1280x1024 as was set up. i had to manually change the screen resolution on both machines (pc and mac) every time after successful start up.

so by far my understanding is that kvm switch forces monitor for 1024x768 during switches and on start up. it also causes the OSes (win2K and MacOSX) to lose 1280x1024 and accept 1024x768 as if the monitor was changed and couldn't operate at a higher resolution.

having said that i uploaded this info to kvm mfg (ATEN) and couple more mac forums so that this info may help someone else when ordering a kvm for mac. at the same time i am still open for any thoughts, advices and crazy ideas to get round this bug.

alex