View Single Post
Shfifty

 
Member Since: Nov 23, 2006
Location: Spring Hill, FL
Posts: 1
Shfifty is on a distinguished road
Mac Specs: 800mhz quicksilver

Shfifty is offline
Well here is the story,
I picked up a power mac quicksilver 800mhz from my work that has been sitting there un-used for a while along with a graphite 400mhz g4. I started up the 400mhz g4 to see if it works, it did. The quicksilver had no hard drive so I put the hard drive from the 400mhz g4 in the quicksilver to start it up. Wellll the quicksilver would not start up. It would power on the start up light, chime and then the power light would fade off. The fan is going by the power supply and the red led is on on the logic board but the HD seems like its not on and there is no video signal. I tried doing the reset cude thing and even took the bettery out of the 400mhz g4 and put it in the quicksilver and the same thing happines...there is also no power going to the keyboard or mouse...if that helps any?!

Ive been searching the web for a while and been searching multiple forums but I just can not find anything to help me...and I dont want to throw money into it if I dont know what the exact problem is.

Thanks, Phil
QUOTE Thanks