View Single Post
muttonhead

 
Member Since: Oct 05, 2011
Posts: 6
muttonhead is on a distinguished road

muttonhead is offline
Quote:
Originally Posted by mrplow View Post
If the drive is physically good it's likely the jumper.

What options for jumper position are listed on the drive?
Hey mrplow, thanks for the reply.

I've included a photo of the drive top (it doesn't look like there are really any jumper instructions) as well as a shot of the previous dead drive that was in the case (top) and the internal drive I installed (bottom) - you can see how the old drive just has a small 2-pin spot and the new one has an 8 pin slot.. not sure if that means anything.

Everytime I run it, it sounds like it's spinning fine.. but nothing is mounting/appearing anywhere on the mac.

D

QUOTE Thanks