PDA

View Full Version : macbook por 2011 antena cables



luckymitchell
11-18-2017, 10:36 PM
hi there, my wifi started to deteriorate and would only work within a few metres of a router, i was going to change the wifi card but found the 3 antenna wires were broken. i read a few post and have seen this has happened to a others, i have searched online for help and found many comments about replacing this parts, but none quite answer my questions, which are.....

1, what do the 3 wires do? if i was able to re-solder them, would they have to be connected to a specific wire/order or are they 3 of the same thing.
2, if the above wasn't possible and i was going to install the new part, can i remove the camera wire from this and use my existing one, this as far as i'm aware would save me having to remove the glass

thanks

chscag
11-19-2017, 12:39 AM
Welcome to our forums.

Go to www.ifixit.com and see how the wires are attached and other info you may need for repair.

luckymitchell
11-19-2017, 06:51 AM
Welcome to our forums.

Go to www.ifixit.com and see how the wires are attached and other info you may need for repair.


i thought i had looked there before..guess i missed it, but now i have the answer,

thank you