- Joined
- Jun 16, 2007
- Messages
- 442
- Reaction score
- 1
- Points
- 18
- Location
- Sydney, Bondi
- Your Mac's Specs
- iMac 27" 3.06Ghz 4G Ram| iPhone 3G 8Gb
I wonder if anyone is having the same issue and if there may be a soloution.
Last night I was shooting a friend of mine and the setup was as followed:
Westcott Apollo
Sunpak 120J + External Battery Pack
PW Transmittor + Reciever + Transcever
I saw that there were 3 PW's because when I started to see the problems I was getting I decided to change things up and see if it was perhaps one of the PW's or something else.
It seemed that if I shot a series of frames then stoped to check them or move my light then very next frame would not fire my flash, but, all frams after that would.
This happened a few times so I started to take note of the PW and the light was firing everytime I shot a frame but not always firing the flash. I switched up the PW's to see if that was the issue but I could see everytime I shot the PW's light came on so it was firing for sure?
My Sunpak's battery pack means that there is no recycle time and I was shooting at 1/32 power anyway so I'm really stumped?
The only thing I didnt do was change the sync cord or batteries - Could this have been a issue? I honestly didnt bother to change either the battery or sync cord because I was thinking it could have been the flash of PW's. I recently picked up the PW's from eBay, they are second hand but in great condition and I think that if it was an issue with one of the PW's I woudnt have had the same issue with all of them.
Any help would be really great!
Last night I was shooting a friend of mine and the setup was as followed:
Westcott Apollo
Sunpak 120J + External Battery Pack
PW Transmittor + Reciever + Transcever
I saw that there were 3 PW's because when I started to see the problems I was getting I decided to change things up and see if it was perhaps one of the PW's or something else.
It seemed that if I shot a series of frames then stoped to check them or move my light then very next frame would not fire my flash, but, all frams after that would.
This happened a few times so I started to take note of the PW and the light was firing everytime I shot a frame but not always firing the flash. I switched up the PW's to see if that was the issue but I could see everytime I shot the PW's light came on so it was firing for sure?
My Sunpak's battery pack means that there is no recycle time and I was shooting at 1/32 power anyway so I'm really stumped?
The only thing I didnt do was change the sync cord or batteries - Could this have been a issue? I honestly didnt bother to change either the battery or sync cord because I was thinking it could have been the flash of PW's. I recently picked up the PW's from eBay, they are second hand but in great condition and I think that if it was an issue with one of the PW's I woudnt have had the same issue with all of them.
Any help would be really great!