- Joined
- Mar 22, 2010
- Messages
- 2
- Reaction score
- 0
- Points
- 1
My apartment clubhouse has unprotected wifi that my iMac can see, but wont really connect. It will connect but wont display a webpage, it will say it has no IP. If I go to advanced, and click "renew DHCP lease" i can get a IP address. but still no go. It might load half a page than nothing, and SLOOWWWWLLY at that. My neighbors, who have a PC, connect and browse just fine. ***!!!!!!!!!!
Im really lost, ive been searching every possible thing for months.
Why can a PC browse but not my Mac
Im on 10.6
AirPort Extreme FW: 5.10.91.19
Here's everything from System Profiler about my airport:
Software Versions:
Menu Extra: 6.0 (600.22)
configd plug-in: 6.0 (600.27)
System Profiler: 6.0 (600.9)
Network Preference: 6.0 (600.22)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.0 (300.20)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x88)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.19)
Locale: FCC
Country Code: X0
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Off
(airport wasn't on at time)
Im really lost, ive been searching every possible thing for months.
Why can a PC browse but not my Mac
Im on 10.6
AirPort Extreme FW: 5.10.91.19
Here's everything from System Profiler about my airport:
Software Versions:
Menu Extra: 6.0 (600.22)
configd plug-in: 6.0 (600.27)
System Profiler: 6.0 (600.9)
Network Preference: 6.0 (600.22)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.0 (300.20)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x88)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.19)
Locale: FCC
Country Code: X0
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Off
(airport wasn't on at time)