Results 1 to 12 of 12
  1. #1
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    Replacing new HDD
    Hi guys .. New to this forum but trust someone can help.
    Working on friends old macbook running 10.4.11. The 120 HDD failed so replaced with similar but 500gb. This showed up as the wrong size with disk utilities similar to other posts I have now read. Was able to FireWire from a similar macbook. HDD recognised correctly, partitioned the disc and loaded Mac OS X. All applications show up. However removing FireWire the original macbook will not boot up. Using the disk utility from the install disk again shows the incorrect HDD drive etc. It still seems OK via the FireWire from another MacBook. Any help advice appreciated.

  2. #2
    Replacing new HDD
    chscag's Avatar
    Member Since
    Jan 23, 2008
    Location
    Fort Worth, Texas
    Posts
    45,190
    Specs:
    27" iMac i5, 3.2 GHz, iPad 3, iPhone 5c, iPhone 6+, 3 iPods, Yosemite
    Please provide the model number and year of the MacBook. Without that info, it's difficult to try to diagnose what the problem may be.

    Also, did you boot the machine with the original disk (OS X Tiger 10.4.11) and run Disk Utility from there? A problem with older MacBooks and Apple notebooks is that the SATA cable which connects the hard drive to the logic board wears out and becomes unreliable. That cable may be bad.

  3. #3
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    The computer is one of 16 bought as a batch for a charity education group. They were Macbook2,1.
    Processor 2.16 Ghz Intel Core 2 Duo.
    I used one of the packs of original disks with the batch of computers. So yes the original install DVD,
    I don't think it is the cable as I swapped the HDDs over between two macs as a test The failed HDD was still failed in the second macbook and the good HDD from the second macbook was still good in the original failed macbook (if that makes sense).

  4. #4
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    Just some further info on startup it goes to the Apple screen with revolving timer, then a circle with a slash through it.

  5. #5
    Replacing new HDD
    harryb2448's Avatar
    Member Since
    Nov 28, 2007
    Location
    Nambucca Heads Australia
    Posts
    20,014
    Specs:
    iMac i5 2.7GHz, 16GB memory, OS 10.10.5
    The original specs available from Mactracker advise it will handle up to 160GB 5400rpm drive, or a 200GB 4200rpm drive. 500GB may be simply too big on a seven year old machine.
    Hang on to those original install discs like grim death! Using OS X.7 or later make a bootable USB thumb drive before running Installer!

  6. #6
    Replacing new HDD

    Member Since
    Apr 24, 2009
    Location
    UK
    Posts
    593
    Specs:
    MacBook Pro 15" 2.8 GHz
    Quote Originally Posted by harryb2448 View Post
    The original specs available from Mactracker advise it will handle up to 160GB 5400rpm drive, or a 200GB 4200rpm drive. 500GB may be simply too big on a seven year old machine.
    I'm typing this on a black MacBook 7,1 2.16GHz 4GB (3GB recognised) running 10.7.5 on a 500GB 7200rpm drive, with a 50GB Win 7 Boot Camp partition. At work I've replaced many hard drives in early MacBook's, 250GB, 320GB and 500GB, with the full capacity recognised. For the OP, your drive should be recognised with it's full capacity, why you have a problem I don't know.
    Steve
    UK

  7. #7
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    I have again tried with a FireWire and erased the 500gb disk, loaded Mac OS X, and applications. The software loads. I confirm all applications are loaded on the new drive. I can run the 500 gb in target mode and run the OS off that drive from a second macbook. However no success runningbthe MacBook with the 500gb disk .. Mystery to me.

  8. #8
    Replacing new HDD
    harryb2448's Avatar
    Member Since
    Nov 28, 2007
    Location
    Nambucca Heads Australia
    Posts
    20,014
    Specs:
    iMac i5 2.7GHz, 16GB memory, OS 10.10.5
    Does any portion of the drive show up in Disk Utility as you mentioned in your original thread?
    Hang on to those original install discs like grim death! Using OS X.7 or later make a bootable USB thumb drive before running Installer!

  9. #9
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    Hi Harryb2448. With the FireWire it shows correctly. I can also see the correctly named volume and then using finder all the applications etc.
    Disk Utility direct to the internal HDD shows the disk as a 3.6tb with a volume with incorrect name, just called disk 02.

  10. #10
    Replacing new HDD
    dtravis7's Avatar
    Member Since
    Jan 04, 2005
    Location
    Modesto, Ca.
    Posts
    28,477
    Specs:
    iMac late 2007 10.11.b4, iMac 2008 10.10.5, Macbook2007 10.7.5, Mac Mini 10.7.5, iPhone 3GS Note 8!!
    It for sure is not the size. The only issue when you get it working with Some larger hard drives that are SATA 2 and the old Macbook is slowness and jerks due to the drive and the older SATA 1 controller not negotiating properly. What brand and model is the new Hard Drive? I put a WD 320GB Blue in my 3.1 Macbook and got the jerks and pauses. WD removed the SATA 1 jumper so I could not force it into that mode. So I bought a 320 GB Seagate which had the SATA 1 jumper and it's fast and smooth.

    The above is NOT your issue though.

    Your issue there I am not sure, the circle with diag line usually means the OS DVD you used it not compatible with the machine you are installing it on.

  11. #11
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    Hi Dennis thanks for the reply. The new HDD is an Hitachi 500gb. Sata 3.0Gb/s.

  12. #12
    Replacing new HDD

    Member Since
    May 19, 2013
    Posts
    7
    Thanks everyone for your replies. Finally solved my problem. Firstly confirmed no hardware issues, computer passed hardware test and I swapped disks between MacBooks. I was able to start a computer from the 500gb drive via FireWire using command/option and selecting new HDD. Software confirmed as 10.4.10. As the MacBooks had been updated to 10.4.11 Previously I connected to the Internet and updated software, still through FireWire. After disconnecting and a restart the PC with the new drive works as new only faster....sorted.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. replacing iBook HDD
    By miketblack in forum Apple Notebooks
    Replies: 1
    Last Post: 05-04-2010, 10:50 PM
  2. 4MOT/1/40000003: HDD error message after replacing hdd
    By autorigin in forum Apple Desktops
    Replies: 0
    Last Post: 12-12-2009, 09:40 AM
  3. Questions about replacing notebook HDD
    By Trolle in forum Apple Notebooks
    Replies: 5
    Last Post: 02-24-2009, 09:00 AM
  4. Replacing MacBook HDD - is this method possible?
    By monkfishbandana in forum Apple Notebooks
    Replies: 14
    Last Post: 04-07-2008, 01:27 AM
  5. Replacing Macbook HDD
    By fasheezy in forum Apple Notebooks
    Replies: 2
    Last Post: 03-22-2008, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •