- Joined
- Sep 14, 2004
- Messages
- 125
- Reaction score
- 0
- Points
- 16
- Location
- Milwaukee, WI
- Your Mac's Specs
- Aluminum 12" 1.33ghz PowerBook G4 w/ 1280mb RAM, 80gb 5400rpm HD, 64mb vid RAM
My USB ports have suddenly stopped working. They will give me power, but no signal. I've tried three different peripherals (SanDisk cruzer micro, 4g iPod and ATI Remote Wonder reciever) and none of them work in either of my two ports. I've tried restarting - still nothing.
I've been using a 4 port hub and all was working fine, except that it seemed like the hub would work, but the open port wouldn't. I would leave the cable from my iPod plugged into the hub as well as the remote wonder reciever. When I would try to plug my flash drive into the open port on the PowerBook, it would light up, but not show up on the desktop. If I'd pull it out and try it in the hub, it would.
I ran the TechTool Deluxe diagnostic program that comes with AppleCare and it said the USB ports are both working fine.
I have AppleCare coverage for another two and a half years as my PB is only about four months old.
Any idea?
I've been using a 4 port hub and all was working fine, except that it seemed like the hub would work, but the open port wouldn't. I would leave the cable from my iPod plugged into the hub as well as the remote wonder reciever. When I would try to plug my flash drive into the open port on the PowerBook, it would light up, but not show up on the desktop. If I'd pull it out and try it in the hub, it would.
I ran the TechTool Deluxe diagnostic program that comes with AppleCare and it said the USB ports are both working fine.
I have AppleCare coverage for another two and a half years as my PB is only about four months old.
Any idea?