Thread: iMac G3 333Mhz HD Question??
09-28-2007, 02:37 PM #1iMac G3 333Mhz HD Question??
I have read that these machines can only take an 8GB HD. But if you get a larger drive you have to put the OS on a 8GB partition. Say I put a 40GB HD in it, Would I have to partition the whole disk into 8 gig sections or can I make one 8 gig sction and a 32 gig section. If I leave a 32 gig partition will the computer be able to see it and use it?
09-28-2007, 03:34 PM #2
- Member Since
- Sep 11, 2007
- Durham NC
- Sawtooth G4 and PB G4 w/FW800
I've seen no such limitation. www.lowendmac.com lists the common 128GB restriction that comes with most older machines (an early IDE spec).
The drive size may have been an OS restriction, but there won't be a problem with any newer OS (9 or 10).
09-28-2007, 03:41 PM #3
- Member Since
- Jan 04, 2005
- Modesto, Ca.
- iMac 2010 27" QuadI7 OSX10.11, iMac 2008 OSX10.11, MBP Late2011OSX10.11 , iPhone 3GS Note 8!
Read under the OSX part. Yes, you have to make the FIRST partition less than 8GB. As long as the first (Boot) partition is less than 8GB, you can make the other any size you want. All the old iMacs from Revision A (233 Mhz to Rev D 333Mhz) require the less than 8GB boot partition.
"If you have a hard drive over 8 GB in size, you must partition it, and the partition containing OS X must be completely within the first 8 GB of space or you will not be able to run OS X. (If you are creating the partition within OS X, it must be 7.45 GB or smaller as reported by Disk Utility, because sometimes a GB is billion bytes and sometimes it's 1,073,741,824 bytes."...Dennis
Mac-Forums Community Guidelines
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Camisado in forum Internet, Networking, and WirelessReplies: 0Last Post: 03-02-2008, 02:53 PM
By officehelper in forum Apple DesktopsReplies: 4Last Post: 01-06-2005, 05:18 PM
By scooterMX in forum Apple DesktopsReplies: 3Last Post: 01-04-2005, 06:48 PM
By swn5363 in forum Apple DesktopsReplies: 14Last Post: 12-23-2004, 04:48 PM