Results 1 to 2 of 2
  1. #1

    Member Since
    Apr 07, 2011
    Unhappy iMac won't boot up
    I just got a used iMac 20" G5 (a 2005 model) without a hard drive or memory. I then bought a 80GB hard drive and 1GB Dr3200 memory. After I installed both and re-installed the software, the iMac worked fine and even connected to my in-home network. I even played part of movie on it and it worked fine. When I started the machine and got a network connection, it must have got an update for the OS software and asked if I wanted to upgrade to it. At first I said no but as I thought more about it, and not ever having a Mac before I finally said yes and did the upgrade. I shut it down fine but when I started it again I got the bong sound and then a couple of error beeps and then I shut it down using the power button hold-down. Now when I try to start it I get nothing past the initial power on light, and eventually the fans go into fast mode. The screen does not even begin to light up. I checked the LED lights and the first two are on, when you plug it in the LED # 1ights up and then #2 lights up when the power button is pushed but #3 never lights up at all.
    I took out the hard drive and the memory stick but it acts the same way. I am beginning to think the CPU is not working properly. Could that be it? I do not have any more memory to check it with either right now. Should I dissemble the CPU and check the continuity? Do I need special tools to do that?
    Thanks for your help. I really need it.

  2. #2

    Buzzard2010's Avatar
    Member Since
    Oct 22, 2010
    Bretforton, Worcestershire
    MacBook Pro 15" 2014, 2.2GHz i7, 16GB RAM, 250GB SSD, OSX 10.9.5 - iPhone 5s 16gb
    Welcome to Mac-Forums alsiebert
    Wish it was under better circumstances. Now you say that you got 2 error beeps at start up? That means that the RAM is incompatible! The full list is below...

    1 beep = No RAM installed/detected

    2 beeps = Incompatible RAM type installed (for example, EDO)

    3 beeps = No RAM banks passed memory testing

    4 beeps = Bad checksum for the remainder of the boot ROM

    5 beeps = Bad checksum for the ROM boot block

    Hope this helps a little
    - Simon

    If you have been helped, don't forget to use the Reputation system at the top right of their post.
    May 2011
    Nominated: March 2011 & April 2011

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. imac won't boot up
    By biggrease in forum Apple Desktops
    Replies: 1
    Last Post: 08-15-2011, 10:35 PM
  2. iMac G5 won't boot, won't load ext HDs
    By photokaty in forum Apple Desktops
    Replies: 0
    Last Post: 06-14-2009, 04:30 PM
  3. New Imac - Won't Boot
    By geekboy2000 in forum Apple Desktops
    Replies: 6
    Last Post: 05-20-2006, 03:29 PM
  4. Help! iMac G5 won't boot up to HD
    By snikro in forum Apple Desktops
    Replies: 3
    Last Post: 02-24-2006, 02:00 PM
  5. iMac G3 Won't Boot
    By davek in forum Apple Desktops
    Replies: 5
    Last Post: 10-14-2005, 10:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts