Results 1 to 6 of 6
  1. #1

    Member Since
    Apr 25, 2008
    iMac is not booting, goes to firmware boot :O?
    Hello everyone,

    I recently bought a second hand iMac G3, 400MHz processor and 128mb ram, 10gb harddrive and it has as i suppose Mac OS 9.2. I've always wanted a Mac just for the fun of it, and i finally got it. I dont think this imac is dead, but i'm having trouble on boot. It is not booting the traditional way, it is going down to firmware boot.

    It gives this info:

    MacOS: Boot Failure! (0xF3C481F6)
    Mac OS: parcel initialization failure - bad checksum

    Then i have 2 choices from the firmware for booting or shutting down 1. mac-boot command and 2. shut-down command.

    So, i give it the mac-boot command; in starts showing the mac face for a few seconds, then it displays this message below of it:


    after maybe a minute it finally displays the face and ? symbol; typical of not finding the system. Problem is that, even starting the imac with the system disc on it and pressing "c" at bootime, it still goes to the firmware thing...

    Is there a way to tell the imac "hey dont boot at firmware, boot at cd!!" ??

    Oh, by the way...during the "/pci@f2000000/mac-io@17/ata-4@1f000/disk@0:5,\\:tbxi" message I can still press the "alt" key and it shows me the retry arrow, the system harddrive labeled "Lorelai's comp", the system CD and the straight right arrow.... i try clicking on the harddrive and also on the CD icons to try to boot, but it only refreshes the screen changing from the traditional blue/purple background to a red-ish background and arrow/drive's buttons get funny colors...

    i dont know what is going on....i dont think the imac is dead....i guess it has to do with that firmware booting default thing...

    please help....
    thanks in advance.

  2. #2

    Member Since
    Oct 27, 2006
    Zap that pram: from a cold dead boot, hold down all four keys together:
    apple option P R
    You need to hear three start up chimes, then let go of the keys.

  3. #3

    Member Since
    Apr 25, 2008

    it's not working...i pressed the four keys, but is only gives 1 chime, and then it goes back to the firmware screen... :S

    by the way i tried a dir cd:,\ and a dir hd:,\ command and they both list me the cd for the first, and the hd for the second...

    can i start the installation from there? how do i do that?

  4. #4

    Member Since
    Oct 27, 2006
    Hmmm, Plan B.
    Roll it over, open it up. Pull the ram chip (you are going to need more of that stuff if this works!). Pull the battery, press the PMU button. Be careful there, pressing for too short a time doesn't do anything. Pressing too long can fry it, killing the motherboard. One second. Put it back together. More prayers!

  5. #5

    Member Since
    Apr 25, 2008
    Ok, done that....nothing.....

    what happens if i repeat the procedure? will i still fry the logic board?

    i powerred it up again, and nothing...samething, firmware stuff again...

    any suggestions?


  6. #6

    Member Since
    Apr 25, 2008
    Hi guys,

    i finally managed to fix this thing, with some help from people at apple forums...the main thread is here

    So basically i found the problem...iMac ran out of firmware was dead and i wasnt aware of i checked it and changed it with the one from the working iMac...also i did the PRAM reset procedure with the firmware console comands:


    after the iMac restarted, there was a black screen..wasnt booting at all, so i was intrigued about the status of the main ram modules...i replaced them with the ones from the working iMac and at last! the iMac came to life :O:O:O

    now i have to buy a battery and a ram module or two, but the main problem is solved...

    thankyou all,



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. iMac G5 - Must use open firmware to boot...
    By DallasDeckard in forum Apple Desktops
    Replies: 2
    Last Post: 10-07-2011, 05:39 PM
  2. Replies: 2
    Last Post: 02-08-2011, 02:49 PM
  3. Replies: 47
    Last Post: 07-26-2010, 12:51 PM
  4. Replies: 5
    Last Post: 06-04-2009, 08:43 AM
  5. Firmware, keyboard, and boot camp issues
    By kuryis in forum Apple Notebooks
    Replies: 0
    Last Post: 01-16-2007, 12:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts