Results 1 to 5 of 5
  1. #1
    ID my Powermac G4

    Member Since
    Apr 13, 2008
    Posts
    2
    ID my Powermac G4
    Hey all

    First post (so please be gentle!)

    I bought a second hand Powermac G4 off ebay a few months back and I'm going to see if it can be my main machine at home.

    I'm trying to identify exactly what model/release of G4 it is. Through a lot of googling and browsing these forums, I think I've narrowed it down to either a Powermac G4 (AGP), a Powermac (Gigabit Ethernet) or Powermac (Yikes!/PCI).

    But I'm confused as to exactly which one it is.

    It has the following specs:

    G4 500mhz processor
    2 Firewire ports at the rear
    2 USB ports at the rear
    ATI video card (the machine isn't in front of me at the moment, I think it only had a very small amount of memory).
    DVDROM
    10 gig hard drive

    Anyone help me identify what type of G4 this baby is?

    My second question is, I want to run OS X. What version is best for the older G4's? I want a brisk machine for browsing, iTuning and word processing stuff so is an older version of OS X going to be faster/better or is Tiger the best bet?

    My intention is to load it up with some more RAM from an old iMac (it will be around 700mb RAM when I'm done).

    Thanks in advance

  2. #2
    ID my Powermac G4
    dtravis7's Avatar
    Member Since
    Jan 04, 2005
    Location
    Modesto, Ca.
    Posts
    28,477
    Specs:
    iMac late 2007 10.11.b4, iMac 2008 10.10.5, Macbook2007 10.7.5, Mac Mini 10.7.5, iPhone 3GS Note 8!!
    If it for sure a 500 Mhz G4 then it's a G4 Sawtooth (AGP Graphics). The Yikes had no AGP slot and the top CPU was 400 Mhz. The Gigabit had either a single 400 Mhz or Dual 450 or Dual 500 Mhz G4's. I own one. Tiger will run but give it all the RAM you can afford. The G4 Sawtooth will take 4 512Meg PC100 Dimm's for 2GB RAM. Just be sure the 512Meg Dimm's do not contain High Density chips. Panther 10.3 will work also but it's getting a bit old and Safari which can not be updated to the newer versions is way out of date. I would up the RAM and run Tiger. It's a lot more modern for todays Web sites.

    If we can help in any way, let us know.

    http://www.lowendmac.com/ppc/sawtoot...ac-g4-agp.html

    That is a URL to your machine.

    Also if it were a Yikes, the Audio Jacks would sit Side by Side instead of One on top of the other like the Sawtooth.

  3. #3
    ID my Powermac G4

    Member Since
    Apr 13, 2008
    Posts
    2
    Cool! The Sawtooth it is.

    Thanks for the quick reply mate appreciate it.

    Getting back to the "which OS X" version, though, I don't want to run Tiger just because the machine "can". I pretty much have the option to install one of the earlier versions of OS X (10.2 for example) if it will be faster for general every-day useage.

    Basically I'm willing to sacrifice a newer version of OS X for optimal performance.

  4. #4
    ID my Powermac G4
    louishen's Avatar
    Member Since
    Oct 22, 2007
    Location
    London
    Posts
    8,968
    Specs:
    Mac Mini Core i7 2012 | White 2009 MacBook 2 Ghz | 733 Mhz G4 Quicksilver
    IMO opinion Tiger runs very well, if not better than jaguar and panther

  5. #5
    ID my Powermac G4
    harryb2448's Avatar
    Member Since
    Nov 28, 2007
    Location
    Nambucca Heads Australia
    Posts
    20,020
    Specs:
    iMac i5 2.7GHz, 16GB memory, OS 10.10.5
    For sure Tiger as you have been advised on your AGP Sawtooth model. One very important thing if you have not used OS X previously, you have to update the firmware to 4.2.8 and probably f1 after that.

    If you go to About this Mac and click on More info, the firmware appears as CD Boot Rom version, second bottom line. If it is not 4.2.8 whilst running OS 9 go to the Apple web site and look for Firmware Upgrades and download both the 4.2.8 upgrade AND the insturctions as this is on e of the only times you will ever use the program mer's button on the front pan el.

    After upgrading, launch into an erase and install version of Tiger. If you have some OS 9 programs, make sure you select 'Install OS 9 Driversl on reformat.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 14
    Last Post: 01-14-2012, 03:33 PM
  2. Replies: 2
    Last Post: 01-08-2011, 01:03 PM
  3. Powermac G4 into a Powermac G5/Mac Pro Case?
    By ijiskimg in forum Apple Desktops
    Replies: 5
    Last Post: 02-18-2008, 03:31 PM
  4. Replies: 13
    Last Post: 03-08-2006, 11:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •